How to configure Chroma lighting on the Razer Kitsune

Updated: 12-May-2026 | Answer ID: 13425
This answer shows you how to configure Chroma lighting on the Razer Kitsune.

Razer Chroma lighting on the Razer Kitsune allows you to personalize your device with different lighting effects, colors, speeds, and brightness levels. This article explains how to adjust and customize Chroma lighting directly on the Razer Kitsune to match your preference.

 

Follow the detailed instructions below on how to configure Chroma lighting on the Razer Kitsune.

Select an action

Cycle through different lighting modes

  1. Set the tournament lock switch to locked state.

  2. Press and hold the create button.

  3. Press the up button to cycle through lighting modes.

    Available lighting modes:

    • Off

    • Static

    • Spectrum Cycle (default)

    • Wave

    • Breathing

    • Reactive

Switch between colors in Static or Breathing effects

  1. Set the tournament lock switch to locked state.

  2. Press and hold the create button.

  3. Press R1 or R2 button to cycle through colors.

    Available colors:

    • Green (Default)

    • Blue

    • Yellow

    • Purple

    • Cyan

    • Orange

    • White

    • Red

Change the speed of Spectrum Cycling, Wave, or Breathing effects

  1. Switch to Spectrum Cycle, Wave, or Breathing mode.

  2. Set the tournament lock switch to locked state.

  3. Press and hold the create button.

  4. Press L1 button to change the speed of the chroma effect.

    Available speed:

    • Slow

    • Moderate (default)

    • Fast

Adjust the brightness

  1. Set the tournament lock switch to locked state.

  2. Press and hold the create button.

  3. Press triangle or circle button to change the brightness of the chroma effect.

    Available Brightness level:

    • 0%

    • 25%

    • 50%

    • 75%

    • 100% (Default)

Is this answer helpful?