How to adjust the height, seat tilt, backseat, armrests, lumbar support, headrest, and seat depth on a Razer Fujin Pro gaming chair

Updated: 24-Sep-2025 | Answer ID: 13551
This answer shows the features and functionalities of the Razer Fujin Pro and how to use them.

 

To ensure the longevity of your Razer Fujin Pro and to keep yourself and others safe, it’s important to understand and adhere to its minimum and maximum operating limits. Proper usage will help prevent any damage to the chair and avoid potential injuries.

Select adjustment type

Height Adjustment

Raise your seat

  1. Raise your body as you lift the gas lift cylinder lever.

  2. Release the lever once the preferred height is achieved.

Lower your seat

  1. Remain seated, lift the gas lift cylinder lever.

  2. Release when the preferred height is achieved.

Refer to point A from the image below.

Illustration of the height adjustment of the Razer Fujin Pro gaming chair

Seat Tilt Adjustment

Recline the seat

  1. Lift the tilt mechanism switch to unlock. 

  2. Lean backward to the preferred angle.

  3. Push down the switch to lock.

Reduce seat reclination

  1. Lift the tilt mechanism switch to unlock.

  2. Lean on the backrest to unlock the safety mechanism.

  3. Lean forward.

  4. Push down the switch to lock once the preferred angle is achieved.

The seat can be tilted up to 11 degrees.

Note: If the chair tilt too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to loosen and counterclockwise to tighten. Refer to Point B from the image above.

Illustration of the height adjustment of the Razer Fujin Pro gaming chair

Backseat Adjustment

  1. Pull out the gas lift cylinder lever to unlock and lean backward.

  2. Push the lever in to lock the seat in a reclined position.

The seat can only be locked in two positions – straight and reclined. The seat can be tilted up to 11 degrees.

Note: If the seat tilts too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to tighten and counterclockwise to loosen.

Illustration of the tilt adjustment of the Razer Fujin Pro gaming chair

Armrests Adjustment

Razer Fujin Pro's 4D armrests allow a fully customizable positioning, helps match the way you sit.

Adjust the height of the armrests

  1. Push the armrest’s height adjustment button to raise or lower the armrests.

  2. Move the armrest left or right.

  3. Release the button once the preferred position is achieved.

Illustration of the armrest adjustment of the Razer Fujin Pro gaming chair

Lumbar Support Adjustment

Shift the lumbar support upward or downward to a desired height.

  1. Rotate the knob clockwise to shift the lumbar support outward.

  2. Rotate the knob counterclockwise to shift the lumbar support inward.

Illustration of the lumbar adjustment of the Razer Fujin Pro gaming chair

Headrest Adjustment

The height and the angle of the headrest can be adjusted as depicted as shown below: 

Illustration of the headrest adjustment of the Razer Fujin Pro gaming chair

Seat depth Adjustment

  1. Lift the seat depth adjustment switch to unlock. 

  2. Shift the base seat forward or backward.

  3. Push down the switch to lock once the preferred position is achieved.

Illustration of the seat depth adjustment of the Razer Fujin Pro gaming chair

Is this answer helpful?