How to add lighting effects on Razer Chroma Studio

The Chroma Studio enables you to create and edit your own Chroma Effects that you can apply to all supported Razer Chroma-enabled devices.

You can view the video below for instructions or review a copy of the video transcript.

To add a Chroma lighting effect:

1. Open the Razer Chroma.

   For PC:

   

   For Mac:

   

2. Go to the “STUDIO” tab.

   

3. Click the Chroma effect you prefer under “ADD EFFECT”. The following is a list of available Chroma effects:

   1. Breathing - Gently pulses in a color of your choice every seven seconds to match your other Razer Chroma-enabled devices.

   2. Fire - Each key light up in warm colors to mimic the motion of flames.

   3. Reactive - Lights up upon actuation and stays lit in either short, medium, or long mode before fading.

   4. Ripple - Radiates your selected color outward from the center of your device like a ripple of water upon actuation.

   5. Spectrum Cycling - Slowly cycles through the entire spectrum of 16.8 million colors.

   6. Starlight - Illuminates your device with twinkling lights in a single color or random colors.

   7. Static - Illuminates your Chroma-enabled device in one of the 16.8 million available colors.

   8. Wave - Animates all colors in a continuous wave of rainbow lights.

   

   The effect will then be added to the "EFFECT LAYERS" section as shown below and will be prioritized from top to bottom.

   

4. Select the effect and apply the effect to your Razer product using the following application tools:

   1. Selector - Select the LED where you want to apply the effect. (Shortcut: Ctrl + S)
   2. Pen - Lets you draw on the LEDs with the current effect. (Shortcut: Ctrl + P)
   3. Paint Bucket - Fill an area continuously with the current effect. (Shortcut: Ctrl + B)

   

   You can also edit the effect using the “Effect Settings” column found at the right side. See the answer below for more information about “Effect Settings”.

   • How to customize a Chroma effect on Razer Chroma App.

     

5. Click “SAVE” located at the bottom-right corner of Chroma Studio.

   

See the answer below to learn how to remove an effect.

• How to remove a Chroma effect on Razer Chroma Studio.