The Razer Sila features a mesh function that allows you to extend the range of its wireless network further by pairing the main Razer Sila with one or two more Razer Sila routers (each sold separately).
Note: Configure the Razer Sila devices one at a time.
Before you start, prepare the following:
- Main Razer Sila with an established working internet connection
- Content from the Razer Sila’s package to be configured as a mesh
Step-by-step process:
-
Make sure that the main Razer Sila, hereon addressed as “Razer Sila Main#1” is online and the status indicator is Green.
-
Unbox and power on the second Razer Sila device that is to be configured as part of the mesh network, hereon addressed as “Razer Sila Mesh#2” or “Razer Sila Mesh#3”, if you are adding a third Razer Sila.
-
Power on the “Razer Sila Mesh#2" or "Razer Sila Mesh#3".
-
Press the Mesh “Sync” button on the back of the “Razer Sila Main#1” for six seconds to initiate the pairing. The status indicator will blink blue to indicate that the router is now in pairing mode.
Note: Pairing mode will only be active for 90 seconds.
-
Press the Mesh Sync button “Razer Sila Mesh#2" or "Razer Sila Mesh#3” for six seconds while the “Razer Sila Main#1” in pairing mode. The status indicator of both Razer Silas will blink blue. Once successfully paired they will light up solid green to show that both devices are now paired and online.
-
Next, unplug “Razer Sila Mesh#2" or "Razer Sila Mesh#3” and place it where better wireless coverage is needed inside your home.
Note: The distance between the Razer Sila devices, metal and physical obstructions, and other wireless devices within the area may affect the overall wireless performance of the mesh network.
