How to loosen and tighten the D-cover screws of the Razer Blade

Updated: 15-Apr-2026 | Answer ID: 20551
This answer will guide you in properly loosening and tightening the D-cover screws of the Razer Blade.

The D-cover screws of the Razer Blade must be handled in a proper sequence. Follow these steps to loosen or tighten the cover.

  1. Shut down the Razer Blade.

  2. Place the Razer Blade on a flat surface.

  3. Look for a T5 screwdriver.

  4. Loosen the screws by turning them counterclockwise. Do not remove them fully. Follow the sequence below.

    Razer Blade 18” (2025) | RZ09-0529x

    Razer Blade 18 back panel

    Razer Blade 14” (2025) | RZ09-0530x

    Razer Blade 14 back panel

    Razer Blade 16” (2026) | RZ09-0581x

    Razer Blade 16 back panel

    Razer Blade 16” (2025) | RZ09-0528x

    Razer Blade 16 back panel

  5. Tighten the screws following the same sequence.

Is this answer helpful?