How to set up the Ripsaw HD with Streamlabs OBS

You can view the video below for instructions or review a copy of the video transcript.

Step-by-step process

1. Open Streamlabs OBS.

2. Add a Video Capture Device in the Sources window.

3. Specify Razer Ripsaw HD HDMI.

4. Add an Audio Input Capture.

5. Specify your microphone if you have one plugged into your Ripsaw HD and streaming computer.

   Note: If you have a webcam plugged in, you can add it as an additional Video Capture Device.

6. In the Settings menu, go to Output and set your preferred Video Bitrate and Encoder, depending on your streaming computer’s hardware capabilities.

   Note: Ideally, your Video Bitrate should be over 6000 Kbps and your Encoder set to “Hardware (NVENC)”.

7. Go to "Audio" and under "Mic/Auxiliary Audio", specify “Razer Ripsaw HD HDMI”.

8. Go to Stream and specify your stream channel’s service.

9. Paste your channel’s Stream Key.

   Note: If you are using Twitch, you can find your Stream Key in Preferences, under the Creator Dashboard.

10. Adjust your audio levels in the Audio Mixer next to the Sources window.

11. Press “Start Streaming” to the far right to start streaming.