Razer Blade 15” Advanced (2019) | RZ09-0301x - BIOS Updates

Updated: 23-Sep-2025 | Answer ID: 2803
This article shows where to download the BIOS updates for the Razer Blade 15 Advanced (2019) Advanced Model and how to install them.

Applicable Models

BIOS update 1.04

  • https://rzr.to/wpnaI | June 26, 2019
  • 19_172-1 [Custom Mode] GPU does not hit TGP(W) Spec after restarting System and launching System Tab.
  • 19_172-3 [Custom Mode] Toggling between 'Balanced' and 'Custom Mode' will cause TGP(W) to not hit Spec Values.
  • Carried over from BIOS v1.03
    • Enable BIOS to assign memory above 4G for AMD Vega/Radeon7 yellow bang via TBT dock(19H1).
    • (19_081-41) [Thunderbolt] Yellow mark on eGPU in device manager after installation of AMD driver.

STEP BY STEP PROCESS

Before you start:

  1. Ensure Windows is up to date. See How to get the latest software and driver updates from Windows.

    If you just updated Windows, please install the "Optional updates" under Settings > Windows Update > Advanced options.

  2. Ensure that your Blade is plugged into a wall outlet and not running on battery alone before proceeding.

  3. Save any open documents on your computer and close all other programs before attempting this update.

  4. Download the latest BIOS Updater.

Update Process

  1. Click on the updater file located in your chosen download location to begin the update process.

    Shot of the updater file downloaded to the folder

  2. The User Account Control window may pop up to confirm changes that will be made by the application (as seen below). Click 'Yes' to allow the RazerUpdater_ application to launch.

    Shot of the User Account control pop-up window

  3. The Blade Updater window will appear with details regarding your current update version and the version that your Razer Blade laptop will be updated too.

  4. Click "Update" to initiate the update process of your Razer Blade laptop. Note: You may lose control of your mouse and keyboard during the updating process. You will also not be able to proceed if you already have the latest software installed.

    Updater window highlighting the UPDATE button

  5. A progress bar will appear indicating the status and progression of the installation process. During the install process, you will not have access to other applications. This update may take 15 minutes or longer to complete, wait on the system to complete the updating process.

  6. The Blade will restart a few times and will automatically boot to Windows once the update is complete.
    Important: Do not force restart or shut down the Blade during this process.

Is this answer helpful?