Razer Tarantula Firmware Updater | RZ03-00070

Updated: 08-May-2026 | Answer ID: 2808
This answer will show you how to update the firmware of the Razer Tarantula.

Applicable Model:

  • RZ03-00070

Firmware v2.10_070509

Follow the detailed instructions below to run the updater on your device.

Step-by-step Process

  1. Download the latest firmware update.
  2. Unzip the files.
  3. Plug in the keyboard.
  4. Double-click the Firmware Updater application.
  5. If prompted to unplug the keyboard, go to step 5, else go to step 6.
  6. Make sure you unplug the keyboard cable (the thicker cable) and that you hear the USB unplug sound.
    Note: When you plug the keyboard back into the same USB port, hold the requested button until you hear the USB plug-in sound and the LEDs stop glowing. The requested button varies depending on the version of the previous firmware.

OR

  1. If 'Found New Hardware Wizard' pops up, please proceed to step to 8, else go to step 9.
  2. Click on Next. Click on Next. Click on Continue Anyway to install the Freescale Driver. Click 'Finish' to complete the installation of the Freescale Driver.
  3. Click 'Next' on the firmware updater window.
  4. The new firmware will load into the keyboard.
  5. Unplug the keyboard.
  6. Re-plug the keyboard (Tarantula LED should start glowing) into the same USB port.
  7. Restart your PC.
  8. End.

Is this answer helpful?