Razer Ripsaw HD Firmware Updater | RZ20-02850

Updated: 08-May-2026 | Answer ID: 2834
This is a guide showing the latest version of the Razer Ripsaw HD Firmware update and how to install it successfully to your system.

Applicable Model:

Firmware v1200.13

  • https://rzr.to/XRIwm | April 20, 2020
  • Fixed an issue where the streaming video is discolored when used with some monitors.

Follow the detailed instructions below to run the updater on your device.

Step-by-step Process

Before you start

  1. Plug the Razer Blade into a wall outlet. Do not let the Razer Blade run on battery alone before proceeding.

  2. Save any open documents on your computer.

  3. Close all other programs.

  4. Download the latest updater.

Update process

  1. Download the latest firmware update by downloading the link found above.
  2. Close Razer Synapse and all other running applications before proceeding with the update.
  3. Run the downloaded firmware (The installer will prompt you to close Synapse and all other applications, if you have already done so, left click "OK" to proceed).
  4. Connect the Razer Ripsaw HD and click "Update".
  5. Wait for the update to complete.
  6. Once the firmware has been successfully applied, left-click "Close" to exit the installer.

Is this answer helpful?