How to pack a Razer gaming chair (Razer Iskur, Razer Iskur X)

Updated: 23-Oct-2026 | Answer ID: 4681

This article shows how to pack a Razer Iskur or Razer Iskur X gaming chair for storage or shipping.

Proper packing helps prevent damage while your Razer gaming chair is being stored or transported.

Important: Before you pack your chair, disassemble it first:

Note: This guide applies to whole chair replacements in case of manufacturing defects. For convenience returns, the chair needs to be packed in its original condition and original packaging as stated in the return and refund policies.

To pack your chair, you need the following:

  • Box (see the minimum size for your chair below)
  • Cushioning materials
  • Wraps
  • Fillers
  • Plastic bag or small box
  • Packaging tape
  • Cutter

Select your gaming chair

Razer Iskur

Box size: not smaller than 37.27 in x 30.26 in x 17.53 in (WxHxD)

  1. Dismantle the Razer Iskur and wrap the parts separately as shown below:

    dismantle and wrap

    You can use any available wrapping materials you have, such as bubble wrap or pads. Store the accessories in a plastic bag or a small box.

    accessories and parts

  2. Once done wrapping the parts, prepare the box to store them in and ensure that the size is enough.

  3. Store the parts in the box with the following sequence:

    1. Seat “C”
    2. Accessories
    3. Base “B”
    4. Head cushion “D”
    5. Backrest “A”

    Put cushioning in between layers for added protection.

  4. Optional: put some fillers for added protection, such as foam peanuts or crumpled newspapers.

  5. Seal the package. Ensure to apply packaging tape evenly across the top and bottom flaps and seams.

Razer Iskur X

Box size: not smaller than 37.27 in x 30.26 in x 17.53 in (WxHxD)

  1. Disassemble the Razer Iskur X.

    Disassembled parts of the Razer Iskur

  2. Wrap the parts separately. Use any available wrapping materials you have, such as bubble wrap or pads.

  3. Store the accessories in a plastic bag or a small box.

    List of accessories and screws of the Razer Iskur that should be stored in a plastic bag or small box

  4. Once done wrapping the parts, prepare the box to store them in and ensure the size is enough.

  5. Store the parts in the box with the following sequence:

    1. Seat “B”
    2. Accessories
    3. Base “C”
    4. Backrest “A”

  6. Put cushioning in between layers for added protection.

    Note: Put some fillers for added protection, such as foam peanuts or crumpled newspapers.

  7. Seal the package. Ensure to apply packaging tape evenly across the top and bottom flaps and seams.

Note: If you are shipping your chair, check the packing procedure of your chosen courier to avoid issues and delays.

Is this answer helpful?