How to use or adjust your Razer gaming chair (Iskur, Enki, Fujin, Soma Chroma)

Raise your seat

1. Raise your body as you lift the gas lift cylinder lever.

2. Release the lever once the preferred height is achieved.

Lower your seat

1. Remain seated, lift the gas lift cylinder lever

2. Release when the preferred height is achieved.

The gas lift height can be adjusted up to 100 mm.

Recline the backseat

1. Pull the backseat lever.

2. Lean backward to recline to the preferred angle.

3. Push down the lever to lock.

Reduce backseat reclination

1. Lean forward as you pull the backseat lever.

2. Push down the lever to lock once the preferred angle is achieved.

The backseat can be reclined up to 152 degrees.

Recline the seat

1. Lift the tilt mechanism lever.

2. Lean backward to the preferred angle.

3. Push down the lever to lock.

Reduce seat reclination

1. Lift the tilt mechanism lever.

2. Lean forward.

3. Push down the lever to lock once the preferred angle is achieved.

The seat can be tilted up to 17 degrees.

Note: If the seat tilts too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to loosen and counterclockwise to tighten.

The Razer Enki’s 4D armrests allow fully customizable positioning to help match the way you sit.

Adjust the height of the armrests

1. Push the armrest’s height adjustment button to raise or lower the armrests.

2. Release the button once the preferred position is achieved.

Move the armrests inward or outward

1. Push the “2” armrests adjustment button.

2. Release the button once the preferred position is achieved.

Move forward, backward, or twist the armrests

1. Push the “3” armrests adjustment button.

2. Release the button once the preferred position is achieved.

Raise your seat

1. Raise your body as you lift the gas lift cylinder lever.

2. Release the lever once the preferred height is achieved.

Lower your seat

1. Remain seated, lift the gas lift cylinder lever.

2. Release when the preferred height is achieved.

The gas lift height can be adjusted up to 100 mm.

Recline the backseat

1. Pull the backseat lever.

2. Lean backward to recline to the preferred angle.

3. Push down the lever to lock.

Reduce backseat reclination

1. Lean forward as you pull the backseat lever.

2. Push down the lever to lock once the preferred angle is achieved.

The backseat can be reclined up to 152 degrees.

1. Pull out the gas lift cylinder lever to unlock and lean backward.

2. Push the lever in to lock the seat in a reclined position.

The seat can only be locked in two positions – straight and reclined. The seat can be tilted up to 11 degrees.

Note: If the seat tilts too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to tighten and counterclockwise to loosen.

Razer Enki Pro's 4D armrests allow a fully customizable positioning, helps match the way you sit.

Adjust the height of the armrests

1. Push the armrest’s height adjustment button to raise or lower the armrests.

2. Twist the armrest left or right.

3. Release the button once the preferred position is achieved.

Raise your seat

1. Raise your body as you lift the gas lift cylinder lever.

2. Release the lever once the preferred height is achieved.

Lower your seat

1. Remain seated, and lift the gas lift cylinder lever.

2. Release when the preferred height is achieved.

The gas lift height can be adjusted up to 100 mm.

Recline the backseat

1. Pull the backseat lever.

2. Lean backward to recline to the preferred angle.

3. Push down the lever to lock.

Reduce backseat reclination

1. Lean forward as you pull the backseat lever.

2. Push down the lever to lock once the preferred angle is achieved.

The backseat can be reclined up to 152 degrees.

This chair cannot lock into a reclined position. It can only be locked in the default position and tilted when unlocked.

Tilt the seat

1. Pull out to unlock and tilt.

2. Push in to lock the default position.

Razer Enki X’s 2D armrests allow a fully customizable positioning, help matches the way you sit.

Adjust the height of the armrests

1. Push the armrest’s height adjustment button to raise or lower the armrests.

2. Twist the armrest left or right.

3. Release the button once the preferred position is achieved.

Raise your seat

1. Raise your body as you lift the gas lift cylinder lever.

2. Release the lever once the preferred height is achieved.

Lower your seat

1. Remain seated, lift the gas lift cylinder lever.

2. Release when the preferred height is achieved.

The gas lift height can be adjusted up to 90 mm.

Recline the seat

1. Pull out the tilt mechanism switch to unlock. 

2. Lean backward to the preferred angle.

3. Push in the switch to lock.

Reduce seat reclination

1. Pull out the tilt mechanism switch to unlock.

2. Lean on the backrest to unlock the safety mechanism.

3. Lean forward.

4. Push in the switch to lock once the preferred angle is achieved.

The seat can be tilted up to 11 degrees.

Note: If the chair tilts too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to loosen and counterclockwise to tighten. Refer to Point B from the image above.

Razer Fujin's armrests allow a fully customizable positioning, helps match the way you sit.

Adjust the height of the armrests

1. Push the armrest’s height adjustment button to raise or lower the armrests.

2. Move the armrest left or right.

3. Release the button once the preferred position is achieved.

1. Lift the seat depth adjustment lever.

2. Shift the base seat forward or backward.

3. Release the lock once the preferred position is achieved.

Raise your seat

1. Raise your body as you lift the gas lift cylinder lever.

2. Release the lever once the preferred height is achieved.

Lower your seat

1. Remain seated, lift the gas lift cylinder lever.

2. Release when the preferred height is achieved.

Refer to point A from the image below.

Recline the seat

1. Lift the tilt mechanism switch to unlock. 

2. Lean backward to the preferred angle.

3. Push down the switch to lock.

Reduce seat reclination

1. Lift the tilt mechanism switch to unlock.

2. Lean on the backrest to unlock the safety mechanism.

3. Lean forward.

4. Push down the switch to lock once the preferred angle is achieved.

The seat can be tilted up to 11 degrees.

Note: If the chair tilt too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to loosen and counterclockwise to tighten. Refer to Point B from the image above.

1. Pull out the gas lift cylinder lever to unlock and lean backward.

2. Push the lever in to lock the seat in a reclined position.

The seat can only be locked in two positions – straight and reclined. The seat can be tilted up to 11 degrees.

Note: If the seat tilts too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to tighten and counterclockwise to loosen.

Razer Fujin Pro's 4D armrests allow a fully customizable positioning, helps match the way you sit.

Adjust the height of the armrests

1. Push the armrest’s height adjustment button to raise or lower the armrests.

2. Move the armrest left or right.

3. Release the button once the preferred position is achieved.

Shift the lumbar support upward or downward to a desired height.

1. Rotate the knob clockwise to shift the lumbar support outward.

2. Rotate the knob counterclockwise to shift the lumbar support inward.

The height and the angle of the headrest can be adjusted as shown below: 

1. Lift the seat depth adjustment switch to unlock. 

2. Shift the base seat forward or backward.

3. Push down the switch to lock once the preferred position is achieved.

With Razer Iskur’s ergonomic lumbar support system, you can enjoy total lower back support, a fully adjustable lumbar curve that closely aligns to your spine—ensuring ideal posture for maximum comfort in gaming marathons.

To adjust the lumbar support, do the following:

1. While seated on the chair, lift the lumbar support lever.

2. Release the lever once the preferred position is achieved.

The lumbar support can protrude up to 130 mm.

Detailed lumbar support adjustment

1. To allow the lumbar support to protrude, slightly lean your body forward as you lift the lever.

   

2. Release the lever to lock once the preferred position is achieved.

   

3. To retract the lumbar curve, push against the lumbar support as you lift the lever.

   

4. Release the lever to lock once the preferred position is achieved.

   

To raise or lower the seat, do the following:

• To allow the seat to rise, raise your body as you lift the gas lift cylinder lever then release the lever once the preferred height is achieved.
• To lower the seat, remain seated, lift the gas lift cylinder lever then release when the preferred height is achieved.

The gas lift height can be adjusted up to 90 mm.

To adjust the backseat, do the following:

• To recline the backseat, pull the backseat lever and lean backward to recline to the preferred angle then push down the lever to lock.
• To reduce backseat reclination, lean forward as you pull the backseat lever then push down the lever to lock once the preferred angle is achieved.

The backseat can be reclined up to 126 degrees.

To tilt the seat, do the following:

• To recline the seat, lift the tilt mechanism lever and lean backward to the preferred angle then push down the lever to lock.
• To reduce seat reclination, lift the tilt mechanism lever and lean forward then push down the lever to lock once the preferred angle is achieved.

The seat can be tilted up to 11 degrees.

Note: If the seat tilts too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to loosen and counterclockwise to tighten.

Razer Iskur’s 4D armrests allow a fully customizable positioning, helps match the way you sit.

To adjust the height of the armrests, do the following:

1. Push the armrests height adjustment button and raise or lower the armrests.

2. Release the button once the preferred position is achieved.

   

3. To move the armrests forward and backward, left and right, or inward and outward, push the armrests “2” and “3” adjustment buttons.

   

While seated on the chair:

1. Rotate the knob on the right side of the backrest to adjust the protrusion of the lumbar.
2. Rotate the knob on the left side of the backrest to adjust the height of the lumbar.

The lumbar support can protrude up to 130 mm.

Raise your seat

1. Raise your body as you lift the gas lift cylinder lever.

2. Release the lever once the preferred height is achieved.

Lower your seat

1. Remain seated, and lift the gas lift cylinder lever.

2. Release when the preferred height is achieved.

Note: The gas lift height can be adjusted up to 90 mm.

Recline the backseat

1. Pull the backseat lever.

2. Lean backward to recline to the preferred angle.

3. Push down the lever to lock.

Reduce backseat reclination

1. Lean forward as you pull the backseat lever.

2. Push down the lever to lock once the preferred angle is achieved.

Note: The backseat can be reclined up to 152 degrees.

Recline the seat

1. Lift the tilt mechanism lever.

2. Lean backward to the preferred angle.

3. Push down the lever to lock.

Reduce seat reclination

1. Lift the tilt mechanism lever and lean forward.

2. Push down the lever to lock once the preferred angle is achieved.

The seat can be tilted up to 11 degrees.

Note: If the seat tilts too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to tighten and counterclockwise to loosen.

The Razer Iskur V2's 4D armrests allow fully customizable positioning to help match the way you sit.

Adjust the height of the armrests

1. Push the armrest’s height adjustment button to raise or lower the armrests.

2. Release the button once the preferred position is achieved.

3. To move the armrests forward and backward, left, and right, or inward and outward, push the armrests “2” and “3” adjustment buttons.

Raise your seat

1. Raise your body as you lift the gas lift cylinder lever.
2. Release the lever once the preferred height is achieved.

Lower your seat

1. Remain seated and lift the gas lift cylinder lever.
2. Release the lever when the preferred height is achieved.

Recline the backseat

1. Pull the backseat lever.
2. Lean backward to recline to the preferred angle.
3. Push down the lever to lock.

Reduce backseat reclination

1. Lean forward as you pull the backseat lever.
2. Push down the lever to lock once the preferred angle is achieved.

Note: The backseat can be reclined up to 152 degrees.

To adjust the seat tilt, pull out to unlock and tilt and push in to lock the default position.

Note: The Razer Iskur V2 X cannot lock at a tilted angle.

1. Push the armrest’s height adjustment button to raise or lower the armrests.

2. Release the button once the preferred position is achieved.

3. Push the armrests’ “1” and “2” adjustment buttons to move the armrests forward and backward, left, and right, or inward and outward.

To raise or lower the seat, do the following:

• To raise the seat - raise your body as you lift the gas lift cylinder lever then release the lever once the preferred height is achieved.
• To lower the seat - remain seated, lift the gas lift cylinder lever then release when the preferred height is achieved.

The gas lift height can be adjusted up to 90 mm.

To adjust the backrest, do the following:

• To recline the backrest, pull the backrest lever and lean backward to recline to the preferred angle then push down the lever to lock.
• To reduce backrest reclination, lean forward as you pull the backrest lever then push down the lever to lock once the preferred angle is achieved.

The backrest can be reclined up to 139 degrees.

To tilt the seat, do the following:

• To recline the seat, pull out the gas lift cylinder lever to unlock and lean backward. Push the lever in to lock the seat in a reclined position.
• The seat can only be locked in two positions – straight and reclined.

The seat can be tilted up to 11 degrees.

Note: If the seat tilts too easily or requires a lot of effort, adjust the tension knob. Turn clockwise to tighten and counterclockwise to loosen.

To adjust the height or twist the armrests, do the following:

1. Push the armrests height adjustment button “1” and raise or lower the armrests.

2. Release the button once the preferred position is achieved.

3. To twist the armrests, hold it firmly and twist to the desired position.

   

The Razer Soma Chroma has a built-in control panel with the following buttons:

• Brightness adjustment buttons
• Power button
• Chroma Presets button
• Source button

Adjust the lighting brightness

1. Locate the brightness adjustment buttons on the built-in control panel.
2. Press the brightness adjustment buttons to increase or decrease the lighting brightness.

Power the chair lighting on or off

1. Locate the power button on the built-in control panel.
2. Press the power button to power the chair lighting on or off.

Cycle through Chroma presets

1. Locate the Chroma Presets button on the built-in control panel.
2. Press the Chroma Presets button to cycle through the available lighting presets.

The available presets are:

• Static
• Spectrum Cycling
• Breathing
• Starlight
• Wave

Note: Repeat this step until the desired preset is active. Use Razer Synapse to customize the chair’s lighting effects and access additional effects for cycling.

Switch between connection modes

1. Locate the Source button on the built-in control panel.
2. Press the Source button to switch between Razer HyperSpeed Wireless and Bluetooth modes.

1. Locate the backrest adjustment controls.
2. Loosen the adjustment control.
3. Adjust the backrest to the desired position.
4. Tighten the adjustment control to secure the backrest.

The Razer Soma Chroma armrests support the following adjustments:

Up-down adjustment

• Adjust the armrest upward or downward to the desired height.

Twist adjustment

• Twist the armrest inward or outward to the desired position.