Razer Raptor 27 QHD-165 Hz Firmware Updater | RZ39-0350

Updated: 05-Mar-2025 | Answer ID: 5785
This answer will provide you the latest software and drivers for your Razer Raptor 27 QHD-165 Hz | RZ39-0350.

Applicable models:

Firmware Updater v1.06_r4

  • https://rzr.to/dn4KPc | November 18, 2021
  • Remove the “THX darkroom” option from on-screen controls
  • Improve overdrive for each refresh rate

STEP-BY-STEP PROCESS

Before you start

  1. If using a laptop, ensure it is plugged into a power outlet.

  2. Save any open documents on your computer.

  3. Close all other programs.

  4. Download the latest updater.

Update Process

  1. Run the updater.

  2. Click “Yes” if the User Account Control window pops up to proceed.

  3. Click "NEXT" after reading the updater precautions.

    Updater window informing to check the firmware highlighting the NEXT button This image contains the following text: RAZER RAPTOR 27 (165HZ) FIRMWARE UPDATER. This utility will update the firmware of your Razer Raptor 27 (165HZ). Please note: This firmware updater can only update one device at a time. Running Razer applications will automatically shut down during the update process. If using a laptop, ensure that it is plugged into a power outlet. This update may take up to 15 minutes. After the update, the display may go blank for a few seconds.

  4. Turn on your Razer Raptor 27.

    Note: Display must output via USB-C port (monitor input source: Type-C).

  5. Connect the Razer Raptor 27 to the USB-C port of your PC.

    Note: You must connect directly to the USB-C port on your PC. Do not use a USB-C adapter or hub.

  6. Click "UPDATE" to initialize the update process.

    Updater window highlighting the UPDATE button This image contains the following text: RAZER RAPTOR 27 (165HZ) FIRMWARE UPDATER. Make sure your Razer Raptor 27 is turned on. Connect the Razer Raptor 27 to the USB-C port of your PC. Connection must be made directly to a USB-C port on your PC. Do not use a USB-C adapter or hub.

  7. Wait for the update process to complete.

    Updater window showing the progress of the update process This image contains the following text: RAZER RAPTOR 27 (165HZ) FIRMWARE UPDATER. Make sure your Razer Raptor 27 is turned on. Connect the Razer Raptor 27 to the USB-C port of your PC. Connection must be made directly to a USB-C port on your PC. Do not use a USB-C adapter or hub. Please don't power off your computer or unplug your device(s). Updating... 4%.

  8. Click "CLOSE" once the update is complete.

    Updater window showing the completion of the update process This image contains the following text: RAZER RAPTOR 27 (165HZ) FIRMWARE UPDATER. Update Successful. Your device has been updated to the latest firmware.

The firmware on your Razer Raptor 27 QHD-165 Hz is now updated.

Is this answer helpful?