How to install Razer Skins on my laptop

Updated: 23-Sep-2025 | Answer ID: 5820
This article provides instructions on how to install Razer Skins on your laptop.

 

You can view the video below for instructions.

See the step by step instructions below

  1. Moisten the included cleaning cloth with a small amount of warm water.

  2. Remove any residue or buildup from your laptop using the cleaning cloth.

    Note: Do not use any chemical cleaners as they may leave a residue that prevents your Razer Skins from attaching properly.

  3. Separate your Razer Skin from the film.

  4. Re-attach film to the back of your Skin for easier handling.  

  5. Align the Skin with your laptop along all edges.  

  6. Gently attach the Skin to your laptop and remove the bottom sheet.  

    Note: Do not press too firmly so you can remove and reattach your Skin as necessary until the fit is just right.  

  7. Peel off the protective film after proper alignment. 

  8. Press firmly throughout the Skin to activate the adhesive and remove any air bubbles.   

  9. Repeat the installation for any remaining Skins. 

Your Razer Skin should cure within 48 hours and form a strong attachment to your laptop. Once cured, the Skin can be removed without leaving a residue, but it cannot be reapplied. 

Is this answer helpful?