How to set up the Razer Key Light Chroma

You can view the video below for instructions or review a copy of the video transcript.

Step-by-step process

1. Loosen the adjustment knob until you fully disassemble the ball-head mount.

   

2. Position the support column's mount groove inside the ball-head mount.

3. Tighten the adjustment knob to lock it in place.

   

4. Securely fasten the extendable column onto the table clamp.

   

5. Loosen the clamp adjustment lever.

6. Slide the table clamp opening towards the edge of your table.

7. Tighten the clamp until it’s secured in place. Ensure it is flush against the edge of your table.

   

   Note: If full lever rotation is limited, pull and rotate the clamp adjustment lever to reposition its starting point.

8. Securely fasten the Razer Key Light Chroma onto the ball-head screw.

   

9. Connect the power adapter to the Razer Key Light Chroma with the correct AC plug for your region.

   

10. Plug the power adapter into a power outlet.

    Note: You can attach the extension cable to the power adapter for a longer reach.

    

11. Switch on the Razer Key Light Chroma.

    

You can now start using your Razer Key Light Chroma.