Razer DeathAdder V3 Pro Firmware Updater | RZ01-046301/2

Updated: 24-Sep-2025 | Answer ID: 6403
This is a guide showing the latest version of the Razer DeathAdder V3 Pro | RZ01-04630 firmware update and how to install it successfully.

Applicable Products:

Note: This is for Non-smooth touch models listed below:

  • RZ01-046301
  • RZ01-046302

Firmware v2.02.00_r2

  • https://rzr.to/5a8pja | May 30, 2025
  • Bug fix for wireless reconnection issues under specific conditions.
  • Bug fix for PC sometimes being unable to sleep when Razer Synapse is running.

STEP-BY-STEP PROCESS

Before you start

  1. If using a laptop, ensure it is plugged into a wall outlet. Do not let it run on battery alone.

  2. Save all files and close all programs.

  3. Download the latest driver.

Update Process

  1. Run the updater.

  2. Click "Yes" if the User Account Control window pops up to proceed.

  3. Click "NEXT" to proceed. The updater will close all running Razer applications.

    Updater initiation window

  4. Select the device you want to update.

    Updater initiation window

  5. Plug in the wireless USB dongle to PC then click "UPDATE".

    Connect dongle to PC on-screen instruction

  6. Wait until the update process is complete. Do not interrupt.

    Ongoing update process

  7. Click "NEXT".

    Updater window showing the completion of the update process on the dongle

  8. Connect the device to PC using the supplied USB cable.

  9. Click "UPDATE".

    Connect mouse to PC using the supplied USB cable on-screen instruction

  10. Wait until the update process is complete. Do not interrupt.

    Ongoing update process

  11. Click "NEXT".

    Updater window showing the completion of the update process using the supplied cable

  12. Click "CLOSE" once the update is complete.

    Updater window showing the completion of the update process

Is this answer helpful?