The Basic Input Output System (BIOS) Setup Utility is where you can see the system's health and hardware status. You can also configure hardware components including hard disk, keyboard, USB, and CPU.
Caution: Any damages that resulted from altering the BIOS is not covered by our Warranty Policy.
Follow the detailed instructions below to access the BIOS settings on your Razer system.
Select your system
Razer Blade
Access BIOS using BIOS Key
Restart your Blade.
On startup, once the “Razer Logo” appears on the screen, tap the "F1" or "Del" key repeatedly.
The BIOS screen should appear as below. If it does not, please try again and ensure that you press the "F1" key fast enough to trigger the setting.
Access BIOS using Advanced Startup
Windows 10
Go to “Settings” > “Update and Security”.
- Select “Recovery”.
Under Advanced startup click on “Restart Now”.
- The Razer Blade will restart and boot up to “Advanced Startup”.
Select “Troubleshoot” > “Advanced options” > “UEFI Settings”.
Click “Restart”. The Razer Blade will then restart to BIOS settings.
Windows 11
Go to “Settings” > “System”.
Select “Recovery”.
Next to “Advanced startup”, click “Restart now”.
Click “Restart now” in the next window.
Wait for the device to restart.
Select “Troubleshoot” in the menu.
Go to “Advanced options” > “UEFI Firmware Settings”.
Click “Restart”. The Razer Blade will then restart to BIOS settings.
Razer Tomahawk Gaming Desktop
Access BIOS using BIOS Key
Restart your Gaming Desktop.
Tap the "F2" key repeatedly once the “Razer Logo” appears upon startup.
Note: The BIOS screen should appear as below. Otherwise, try again and ensure that you press the "F2" key fast enough to trigger the setting.
Access BIOS using Advanced Startup
Windows 10
Go to “Settings” > “Update and Security”.
Select “Recovery”.
Click “Restart Now”.
The Gaming Desktop will restart and boot to “Advanced Startup”.
Select “Troubleshoot”.
Click “Advanced options”.
Select “UEFI Settings”.
Click “Restart”.
The Gaming Desktop will then restart to BIOS settings.
Windows 11
Go to “Settings” > “System”.
Select “Recovery”.
Next to “Advanced startup”, click “Restart now”.
Click “Restart now” in the next window.
Wait for the device to restart.
Select “Troubleshoot” in the menu.
Go to “Advanced options” > “UEFI Firmware Settings”.
Click “Restart”. The Razer Tomahawk Gaming Desktop will then restart to BIOS settings.
