Effective February 3, 2026, Razer Synapse 3 will no longer receive updates or support cloud services. After this date, cloud syncing of configurations across PCs using the same Razer ID will be disabled.
Note: Your installed devices will continue to be configurable in Razer Synapse 3. However, if you uninstall these devices completely, you will need to upgrade to Razer Synapse 4 to continue customization.
Download Razer Synapse 4 and migrate your existing Razer Synapse 3 profiles using the Profile Migration Tool to retain access to your configurations. See How to migrate your Razer Synapse 3 Profile to Razer Synapse 4 for instructions.
Applicable Models
- RZ03-00070
Firmware v2.10_070509
- https://rzr.to/bu2s0 | April 29, 2011
Step By Step Process
- Download the latest firmware update.
- Unzip the files.
- Plug in the keyboard.
- Double-click the Firmware Updater application.
- If prompted to unplug the keyboard, go to step 5, else go to step 6.
- Make sure you unplug the keyboard cable (the thicker cable) and that you hear the USB unplug sound.
Note: When you plug the keyboard back into the same USB port, hold the requested button until you hear the USB plug-in sound and the LEDs stop glowing. The requested button varies depending on the version of the previous firmware.
OR
- If 'Found New Hardware Wizard' pops up, please proceed to step to 8, else go to step 9.
- Click on Next. Click on Next. Click on Continue Anyway to install the Freescale Driver. Click 'Finish' to complete the installation of the Freescale Driver.
- Click 'Next' on the firmware updater window.
- The new firmware will load into the keyboard.
- Unplug the keyboard.
- Re-plug the keyboard (Tarantula LED should start glowing) into the same USB port.
- Restart your PC.
- End.
